NodeMCU Sinhalen 02 – Install Drivers & Setup Arduino IDE for Programming 

 

 

 

 

අද වීඩියෝ එකෙන් බලන්න හදන්නේ  Nodemcu Board එකට අවශ්‍ය Drivers Install කරගන්න විදිය සහ Arduino IDE එකේ කරගන්න ඕනෙ වෙනස් කම් ටික. මේ Video එක බලලා ඔයාලගේ අදහස් Comment කරන්න Subscribe කරන්න Like කරන්න Share කරන්න 

Board Manager Url = http://arduino.esp8266.com/stable/package_esp8266com_index.json

CP210x Drivers – https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

 

Comments

Post a Comment

Popular posts from this blog

Image
  Sinhala Arduino | How to make obstacle avoiding car using arduino & l298n motor driver H-Bridge  Diagram - code- #include <Servo.h>          //Servo motor library. This is standard library #include <NewPing.h>        //Ultrasonic sensor function library. You must install this library //our L298N control pins const int LeftMotorForward = 4; const int LeftMotorBackward = 5; const int RightMotorForward = 6; const int RightMotorBackward = 7; //sensor pins #define trig_pin 2 #define echo_pin 3 #define maximum_distance 200 boolean goesForward = false; int distance = 100; NewPing sonar(trig_pin, echo_pin, maximum_distance); //sensor function Servo servo_motor; //our servo name void setup(){   pinMode(RightMotorForward, OUTPUT);   pinMode(LeftMotorForward, OUTPUT);   pinMode(LeftMotorBackward, OUTPUT);   pinMode(RightMotorBackward, OUTPUT);     servo_motor.a...
Read more
     Sinhala Arduino Tutorial 10|Soil Sensor Module                   1st code-   int soil = A1;   //connect soil to A0 int value= 0; //define value 0 void setup() {  pinMode(soil,INPUT);  Serial.begin(9600); //this is not necessary-but to show value to pc } void loop() {  value = analogRead(soil );  //read value-analog from A0  Serial.println(value);      delay(100); } 2nd code- int soil =A1; int value=0; int led=13; void setup() {  pinMode(soil,INPUT);  pinMode(led,OUTPUT);  Serial.begin(9600); //this is not necessary-but to show value to pc } void loop() {  value = analogRead(soil );  //read value-analog from A0  Serial.println(value);      delay(100);   if(val>340){ digitalWrite(led,HIGH); }  if(val>930){ digitalWrite(led,LOW); } delay(100); }
Read more
Image
Sinhala Arduino Tutorial | How to control rgb led  colors with bluetooth and ir   1) Arduino program - char p; #include <IRremote.h> IRrecv Piusha(A2); decode_results results; #define redPin 6 #define greenPin 3 #define bluePin 5 void setup() {    digitalWrite(6,HIGH);         digitalWrite(3,HIGH);         digitalWrite(5,HIGH);   Serial.begin(9600);   Piusha.enableIRIn();     pinMode(redPin, OUTPUT);   pinMode(greenPin, OUTPUT);   pinMode(bluePin, OUTPUT); } void loop() { if (Piusha.decode(&results)) {     Serial.println(results.value, DEC);     Piusha.resume();   }   delay(100);   long val = results.value;     if (Piusha.decode(&results)) {     Serial.println(results.value, DEC);     Piusha.resume();   }   if (val ==16195807) {     digitalWrite(6,LOW);//red col...
Read more